A collision occurred.
Send a photo to email@example.com and do not attempt to reset the machine.
The lubrication pump is no longer working.
Try to remove the pump and clean it.
The pump still won't work after cleaning.
Check the pressurised air reaches the pump.
Only a little oil comes out and the pump leaks.
You need to replace the pump.
The clamps won't close.
Check system pressure, which must be at least 6 bar.
Axis Z falls after emergency implementation.
Check the axis Z zimmer or the brake.
The tool change won't open.
Check the presence of pressurised air and check the drive valve.